Changing your lawn mower's oil is an important part of keeping the engine in good working condition. Over time, oil collects dirt and contaminants, gradually becoming less effective at lubricating moving parts. Without regular oil changes, your mower can experience increased engine wear, overheating, and performance problems.
Whether you have a push mower or a riding lawn mower, knowing how to change lawn mower oil can help extend the life of your equipment and reduce the risk of costly repairs. Fortunately, the process is relatively straightforward for most four-stroke lawn mower engines, provided you have the right supplies and follow the manufacturer's instructions.
Why Is Changing Lawn Mower Oil Important?
Lawn mower engines work hard throughout the growing season, especially when cutting thick grass or maintaining larger properties. Engine oil reduces friction between moving parts and helps carry heat away from critical components.
As oil ages, it can become contaminated with dirt, fuel, and other particles. This reduces its effectiveness and can eventually contribute to engine damage.
Regular lawn mower oil changes can help:
- Reduce friction and wear inside the engine
- Maintain proper engine lubrication
- Prevent excessive heat buildup
- Improve engine reliability
- Extend the mower's working life
Changing the oil also allows you to inspect your mower for leaks and other maintenance issues before they become more serious.
How Often Should You Change Lawn Mower Oil?
How often you should change lawn mower oil depends on the type of mower, engine design, and how frequently you use the equipment.
Many manufacturers recommend changing the oil after the first five hours of operation on a new engine, followed by regular changes based on operating hours or seasonal maintenance intervals. However, requirements vary by model, and some engines have different maintenance schedules.
For many residential lawn mowers, changing the oil at least once per mowing season is a useful general guideline. Mowers used frequently or under demanding conditions may require more frequent service.
Always check your owner's manual for the recommended oil change interval. Some newer engines are designed with different oil maintenance requirements, so following the manufacturer's instructions is important.
What You'll Need to Change Lawn Mower Oil
Before starting, gather the necessary tools and supplies. Having everything ready will make the process easier and help prevent spills.
Depending on your mower, you may need:
- Fresh engine oil recommended by the manufacturer
- An oil drain pan or suitable collection container
- A funnel
- A socket wrench or appropriate hand tools
- Clean rags or paper towels
- A replacement oil filter, if required
- Protective gloves
You should also have your mower's owner's manual available to confirm the correct oil type, capacity, and draining procedure.

How to Change Lawn Mower Oil: Step by Step
Although the exact process varies between models, most four-stroke push mowers and riding lawn mowers follow a similar oil change procedure.
Step 1: Prepare the Lawn Mower
Start by placing your mower on a flat, stable surface with the engine turned off. If the manufacturer recommends warming the engine before draining the oil, run it briefly outdoors and then shut it off. Allow hot components to cool enough to handle safely.
For walk-behind mowers, disconnect the spark plug wire to prevent accidental starting. Riding mowers should have the parking brake engaged and the ignition key removed. Follow any additional safety instructions in the owner's manual.
Step 2: Locate the Oil Fill Cap and Drain Plug
Find the oil fill cap or dipstick, usually located near the engine. Many riding lawn mowers also have a dedicated oil drain plug or drain hose that allows used oil to flow into a collection container.
Some push mowers do not have a separate drain plug. Instead, the manufacturer may instruct you to drain the oil through the fill tube by carefully tilting the mower.
Check your owner's manual before tilting the equipment, since tipping a mower in the wrong direction can allow oil or fuel to enter the air filter or other engine components.
Step 3: Drain the Old Engine Oil
Position an oil drain pan beneath the drain opening. Remove the drain plug or open the drain valve according to the manufacturer's instructions, allowing the used oil to flow into the container.
If your mower requires draining through the fill tube, follow the manufacturer's recommended tipping direction and procedure. Take care to prevent fuel spills, and never tip a mower while the engine is running or hot.
Allow the oil to drain as directed before returning the mower to its normal position or closing the drain valve.
Step 4: Replace the Oil Filter if Necessary
Some riding lawn mowers and larger engines have replaceable oil filters. If your mower has one, check whether the filter should be changed during the oil service.
Remove the old filter using the appropriate tool and install the replacement according to the manufacturer's instructions. Many spin-on filters require a light coating of fresh oil on the rubber gasket before installation.
Avoid overtightening the filter, as this can damage the gasket or make future removal difficult.
Step 5: Add Fresh Lawn Mower Oil
Once the old oil has been drained and the drain plug is securely installed, add the recommended amount of fresh oil through the fill opening.
Use a funnel to prevent spills, and add the oil gradually rather than pouring in the entire amount at once. The correct oil capacity varies depending on the engine.
Check the dipstick or oil level indicator according to the manufacturer's instructions. Adding too much oil can cause operating problems, so avoid filling beyond the recommended level.
Step 6: Check the Oil Level and Test the Mower
After adding the oil, reinstall the fill cap and reconnect the spark plug wire if it was disconnected. Make sure all drain plugs, filters, and other components are properly secured.
Start the mower outdoors and let it run briefly while checking for leaks or unusual noises. Turn off the engine, allow the oil to settle as directed, and check the level again.
If necessary, add a small amount of oil to bring it within the recommended range.
What Type of Oil Does a Lawn Mower Use?
Using the correct oil is just as important as changing it regularly. Different lawn mower engines have different lubrication requirements, and the right oil depends on the engine design and operating conditions.
Common oil types used in four-stroke lawn mower engines include:
- SAE 30: Often recommended for small engines operating in warmer temperatures.
- SAE 10W-30: A multigrade oil that can work across a wider temperature range when approved by the manufacturer.
- Synthetic 5W-30: Suitable for certain engines and operating conditions, depending on manufacturer specifications.
Do not assume that every mower uses the same oil. Some two-stroke engines require oil mixed with gasoline rather than oil added to a separate crankcase, and certain newer four-stroke engines have specific maintenance requirements.
Always follow the oil recommendations in your owner's manual.
Can You Change Lawn Mower Oil Yourself?
Changing your lawn mower oil can be done by many homeowners using some basic tools. For most four-stroke engines, it’s a relatively easy job as long as the oil drain is easy to reach.
Some lawn mowers have oil drains that are difficult to access or require additional steps to remove the oil filter.
If you're unfamiliar with the process, having your mower checked by a professional can help prevent problems. Bethel Power Equipment offers lawn mower maintenance and repair services for homeowners in Connecticut.
Common Lawn Mower Oil Change Mistakes to Avoid
Although changing lawn mower oil is relatively simple, certain mistakes can cause problems.
- Using the wrong oil: Incorrect oil viscosity or specifications can affect engine lubrication and performance.
- Overfilling the engine: Too much oil can cause smoking, leaks, or other operating issues.
- Forgetting the drain plug: An improperly secured drain plug can allow fresh oil to leak out.
- Tilting the mower incorrectly: Oil or fuel can enter the air filter or other engine components.
- Skipping regular oil changes: Old oil can contribute to increased friction and premature engine wear.
Used engine oil should never be poured onto the ground, into drains, or into household trash. Collect it in a suitable sealed container and take it to an authorized oil recycling or collection facility.
When Is the Best Time to Change Lawn Mower Oil?
For many Connecticut homeowners, early spring is a convenient time to change lawn mower oil. Servicing your mower before the growing season gives you an opportunity to check the engine and address potential problems before regular mowing begins.
Fall is also a good time to change the oil, especially if your mower got heavy use over the summer. This means that when you store your lawn mower for winter, the old oil won’t be sitting in the engine for several months.
Regardless of the season, follow the manufacturer's recommended maintenance schedule. If your mower reaches its oil change interval during the growing season, don't wait until spring or fall to replace the oil.
Keep Your Lawn Mower Running With Bethel Power Equipment
Regular oil changes are an important part of lawn mower maintenance. This can help to prevent unexpected failures in your equipment.
At Bethel Power Equipment, we can help homeowners and property owners across Bethel, Wilton, and surrounding communities in Connecticut with all of your lawn mower and outdoor power equipment requirements. We can help you find the right new mower, spares or simply answer any questions you may have about how to maintain your existing equipment.
Visit Bethel Power Equipment today to explore our selection of lawn mowers, find replacement parts, and get advice on keeping your equipment in good working condition throughout the mowing season.



Search Website